accessgroup 105 out ip nat outside duplex auto speed auto >! interface FastEthernet0/1 ip address

add 192.168.0.1 255.255.255.0ip nat insideip tcp adjustmss 1450>!inter ATM0no ip addressno atm

timestamps debug uptimeservice timestamps log uptime>no service passwordencryption!hostname

,先谢了！ FW:前几天刚刚用CISCO的这块板子做了测试，具体的配置大概是： controller sonet 1/1/0 P>framing sdh clock source line aug mapping au4 au4 1 tug3 2

试验目的：登录路由器的时候，需要输入你自己的用户名和密码，通过radius验证通过之后，再允许登录路由器。配置文件如下，每个路由器都一样的配置R2503>enPassword:R2503#sh

PIXShanghai> enPassword: **********PIXShanghai# show run: Saved:PIX Version 6.3(1)interface

：http://pciids.ucw.cz 2.通过vendorid确认网卡的devide id： # prtconf vp | grep 网卡的vendor id> 得到可能的devideid后到PCI设备的数

: %SYS2GETBUF: Bad getbuffer, bytes= 68444513 Process= "Init", ipl= 0, pid= 2 >Traceback= 80378168 8081667C 80816568 8041BBC4 8041BDC0 8041C0B8 80

telnet服务pix515防火墙配置策略实例#转换特权用户pixfirewall>enapixfirewall##进入全局配置 模式pixfirewall# conf t#

hostname pooh BR>ip host rund 172.17.247.195 ! ip subnetzero no ip domainlookup ! vpdn