找到“1 1L510(1.5GHz/20Gb/DOS)”相关信息141858条结果
  • 双绞线测试错误的解决方法
    对双绞线缆进行测试时,可能产生的问题有:近端串扰未通过、衰减未通过、接线图未通过、长度未通过,现分别叙述如下: 1. 近端串扰未通过原因可能有: 1) 近端连接点有问题; 2) 远端连接点短路
    应用 2007-06-24
  • IP sec的VPN配置
    IP sec的VPN配置 左边的router: crypto isakmp policy 1 hash md5 authentication preshare crypto isakmp key
    应用 2007-06-24
  • 关于Catalyst 6500 VLAN划分的问题
    前一段时间与一位网友探讨过关于6500的VLAN划 分问题,具体结构图如下:问题如下:Cisco 7206的配置1. 以太口配置:210.18.1.19(合法IP)2. S4/0/0配置
    应用 2007-06-24
  • switch命令大全集合
    1.switch(config)# hostname hostname 在基于CLI的交换机上设置主机名/系统名: switch(enable) set system name namestring
    应用 2007-06-24
  • Tunnel的具体配置
    of the Cisco 1600 a nd the Ethernet 1/1 of the Cisco 7206 are the endpoints of the tunnel. It will be a simple
    应用 2007-06-24
  • Cata 3550的配置清单
    passwordencryption ! hostname s3550emi ! enable secret 5 $1$GNOM$/MQkwi26bXabrf57Zm2vH1 enable password cisco ! ip sub
    应用 2007-06-24
  • Mize日记: 分身有术 (Cisco AS5300)
    Keywords: AS5300 ISDN PRI dial modempool AAA RADIUS IAS 一位客户新安装一台Cisco AS5300拔号访问服务器, 用两根CE1提供60路
    资讯 2007-06-24
  • Cisco 2621 adsl配置实例
    环境:2621+wic1adsl+yb2结束的ios,电信过来的线路to通过rj11直接插到wic1adsl里面 Current configuration : 1241 bytes!version
    应用 2007-06-24
  • 单接口的nat配置
    条件:1、IOS在12.1(5)T9及以上版本。更低版本未做验证。2、至少具有两个或多个ISP提供的的global地址。 实现思路:1、将ISP提供的地址作为secondary地址配置在以太接口
    应用 2007-06-23
  • 灌IOS的问题分析
    。而且只要断电就又回到rommon,什么原因啊。rommon 1 rommon 1 dir flash: File size Checksum File name 2742 bytes (0xab6) 0xb9
    应用 2007-06-23